Axiom Turbine
Smaller engines. Greater horizons.
We design small turbofan engines, and help engine makers get more out of the engines they already have.
Engine models
Small turbofans, designed from the fan inward.
Every Axiom engine starts at the front, with the fan and booster designed together. Our family covers twin light jets, a six-seat single jet, a regional freighter and long-range cargo drones.
About our engine models
A7.2.112.9 kN · twin light jetThe baseline of our A7 family.
A7.3.210.5 kN · FL450 twinBuilt for climb and cruise high above the weather.
A8-213.5 kN · six-seat singleOne engine in the tail of a six-seat jet.
A9-213.7 kN · regional freighterTwo engines for a light regional freighter.
A micro turbofan for long-range civil cargo drones, 1,643 N of take-off thrust and a bypass ratio of 7.5 in a 47 kg engine, 1,643 N of take-off thrust and a bypass ratio of 7.5 in a 47 kg engine, 1,643 N of take-off thrust and a bypass ratio of 7.5 in a 47 kg engine, 1,643 N of take-off thrust and a bypass ratio of 7.5 in a 47 kg engine, with the fuel economy of a turbofan in place of a turbojet.
About the AFT-2.1What we do
Better engines for the smallest jets in the sky.
Small jets are getting lighter, flying higher and carrying fewer pilots. Their engines have to keep up. We take on new engine designs and the redesign of existing ones, from a first cycle study to a prototype built to tolerance.
About Axiom TurbineLow-pressure module
It all starts at the front.
The fan and the booster decide most of what a small engine can do at altitude. We design them together, as one low-pressure module, and tune it for each engine.
About the LPM
System simulation
Every engine is tested in the aircraft it is made for.
Our aircraft models let us fly each engine through a full mission and judge it the way an operator would: climb, range, fuel and runway length.
See the design modelsOur focus
Built for small turbofans.
- Take-off thrust
- <20kN
- Engine designs in the family
- 5
- Aircraft models for simulation
- 5
- Applications
- Civilonly
Design models
Aircraft built to test our engines.

Twin jet, rear engines
Our reference aircraft. Every engine change is measured against it.

Six-seat single jet
One engine, six people, above the weather.

Light regional freighter
Container freight on two Axiom engines.

Express-cargo drone
Time-critical regional cargo on one AFT-2.1.
How we work
Decades of know-how, built into our tools.
Our in-house design tools grew out of many years of aerodynamics and turbomachinery work. Every project makes them a little sharper, and every client gets the benefit.
How we work with partners- Your requirementsThrust, altitude, weight and size targets
- Engine cycleThe engine matched to the mission
- Low-pressure moduleFan and booster designed as one
- Aircraft simulationThe engine flown in a full mission
- PrototypeBuilt by our production partners
Partnering
Have an engine to design, or one to make better?
Our design team takes a project from your requirements to a tested design. A project manager keeps it on time, and our production partners can build the prototype.
Latest