LPM Design · Axiom Turbine

LPM Design

The low-pressure module.

The low-pressure module (LPM) is the integrated intake, fan, guide vanes, splitter and booster. It is where small engines gain or lose their altitude performance, and it is the centre of our research. We design it as one module and tune it for each engine.

A7.2.1 · LPM 3D model

The A7.2.1 low-pressure module, in two booster options.

Rendered from the CAD model of the A7.2.1 LPM: the two-stage fan with its guide vanes, followed by either an axial booster (option A) or a mixed-flow booster (option M). Turn it, open it and switch the rows on and off.

Loading the 3D model…
drag to rotate · scroll or pinch to zoom · right-drag to pan

Booster option

View

Blade rows

Preliminary design geometry, shown for illustration. Not for manufacture.

Our approach

Designed as one module.

The fan, its intake, the splitter and the booster decide how much air the engine takes in, how much pressure it gives the core and how much thrust is left at altitude. We design them together and check operability from take-off to the top of the climb.

Work with our LPM team
  1. Intake and fanSized for the top-of-climb design point
  2. Splitter and guide vanesClean flow to the bypass duct and the core
  3. BoosterAxial or mixed-flow, matched to the core
  4. OperabilityStall and surge margin across the envelope
  5. CFD and testDetailed analysis, then rig testing